Out of stock
SKU
XGT2-1

XGT2 Flexible Coupling

  • Zero Backlash
  • High gain supported
  • High torsional rigidity
  • High Torque
  • Vibration absorption characteristics
HK$0.00
Out of stock
  • Zero Backlash
  • High gain supported
  • High torsional rigidity
  • High Torque
  • Vibration absorption characteristics
Description

Specs/CAD

unit: inch

Part NumberALWFGMWrench
Torque
(N･m)		Standard bore diameter
D1-D2		Additional Modification
XGL2-15C 15 6.5 30 2.15 5 M1.6 0.25       
XGL2-19C 19 7.7 34 2.65 6.5 M2 0.5       
XGL2-25C 25 9.5 42 3.25 9 M2.5 1       
XGL2-30C 30 11 42 4 11 M3 1.5       
XGL2-34C 34 12 44 4 12.25 M3 1.5       
XGL2-39C 39 15.5 55 4.5 14.5 M4 2.5       

Part NumberMax. Bore Diameter
(mm)		Keyway Additional Modification Max. Bore Diameter (mm)Rated
Torque＊1
(N・m)		Max.
Rotational
(min-1)		Moment
of
Inertia＊2
(Kg・m2)		Static
Torsional
Stiffness
(N・m/rad)		Max. Lateral Misalignment
(mm)		Max. Angular Misalignment
(°)		Max. Axial Misalignment
(mm)		Mass＊2
(g)
XGL2-15C 6 - 1.1 42000 3.6×10-7 82 0.15 1.5 ±0.2 11
XGL2-19C 8 6 2.1 33000 1.0×10-6 210 0.15 1.5 ±0.2 20
XGL2-25C 12 9 4 25000 3.8×10-6 300 0.15 1.5 ±0.2 40
XGL2-30C 15 11 6.3 21000 7.6×10-6 540 0.2 1.5 ±0.3 56
XGL2-34C 16 12 8 18000 1.4×10-5 640 0.2 1.5 ±0.3 78
XGL2-39C 20 15 13.5 16000 2.9×10-5 950 0.2 1.5 ±0.3 122

＊1：　Adjustment of rated and max. torque specifications for load fluctuations is not required.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for XGT is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
＊2：　Based on the max. shaft bores.

Part NumberStock Bores　D1-D2
XGL2-15C 3-5 5-5 5-6    
XGL2-19C 4-5 5-5 5-6 5-7 5-8
6-6 6-6.35 6-8 6.35-8 8-8
XGL2-25C 5-8 6-8 6-10 6.35-8 8-8
8-10 8-11 8-12 10-10 10-12
XGL2-30C 8-8 8-10 8-11 8-12 8-14
8-15 10-10 10-11 10-14 11-12
12-14        
XGL2-34C 8-8 8-10 8-12 8-14 10-11
10-14 11-12 12-14 14-15  
XGL2-39C 10-10 10-12 10-14 12-14 14-15
15-19        

●All products come with set screws.
●Recommended tolerance for shaft diameters is h6 and h7.
●Bore and keyway modifications are available on request. Please take advantage of our bore modification services.
For more information please refer to Custom Bore Modifications [PDF 495KB]

More Information
More Information
Model number N/A
Material Aluminium alloy
Characteristics N/A
Color N/A
© 2023 SZAIS. All Rights Reserved.